THERE IS 1 TECHNICAL ADIVISORIES FOR THIS PART!
Aftermarket Part - Not Manufactured by Penn
Made by Cortez Conversions.
Gear sleeves are made to be an upgrade to the brass gear sleeve in many Penn reel models.
(98-60-SS aka 98-60CC) (Coarse Thread)
- Manufactured from 416, heat treated stainless steel
- Manufactured with 10 teeth (Penn only has 8)
- Coarse pitch thread, requires matching coarse pitch star 10-60
- Recommend if you INTEND to exceed 8 pounds of drag (based on use in the 500 Jigmaster, but applies to any of the reels where you want to apply more drag than originally intended)
ADVISORY #1: About PIN HOLE placement and BRIDGE types
The 98-60CC has the hole drilled midway on the line made by the flat edge and the round side which allows it to fit to both types of bridges.