NOTE: hole for knob is 5mm = .197mm
Handle blank ONLY, not a full handle.
Aftermarket Part - Not Manufactured by Penn Pro Challenger's Custom Handle Blade Specification: - Made with aluminum T6061-T4 (with heat treated for Harding)
- Off set bent in
- Overall length is little over 4.25 inches
- Handle lock screw included. Please note that lock screw will fit one side on the handle only
- Two holes position connection
| |
For PENN 114H 6/0 to 115 9/0 Reels
114, 114-LH, 114H, 114H-LH, 114HSP, 114HL, 114HL-LH, 114HLW, 114HLW-LH, 115L, 115L-LH
USES THE 110-PRO CUSTOM SCREW, INCLUDED