This 117-30 plate is used with the 6A-30 washer/plate, along with the current 13-30 pinion gear.
DESIGN CHANGE NOTES FOR UPGRADING TO NEWER DRAGS for 130 and 130H original internationals
This applies to these two older 130 and 130H models only, other newer models use the 6DN-130 as a stock part.
If your reel has the older separate asbestos/fiberglass drag washer system.
You cannot use 6DN-130 with the older outer and inner plates. They would also have to be changed, so you would need:
NOTES:
7A-130 floating washer was not changed and 118-80S DRIVE PLATE SCREWS (8 REQ.) remain the same.