The 114H full frame is discontinued not available
Changing over to the 114H half frame would also require some changes of side plate screws to match.
NOT USED: The 31-11 handle side stand screws and 32-20 non-handle side stand screws you would either bag/label to keep for another reel, or discard. The stand is part of the frame, they will no longer be needed.
Non-handle side plate you'll need to change to (4) of the 39-13 post screws for the frame.
You'll need to replace one on the top with with (1) 32-21. The old non-handle side 39-12 screws would be bag/labeled to be kept - NOTE: one of those is used on the other side, see next set of notes.
Handle side plate you can use (4) of the 39-13 post screws that are already there.
You'll need one of the old 39-12 non-handle side screws to use as the post screw on this side.
BREAKDOWN of parts that will need to be ordered to switch to frame:
(1) 183-114H frame, half
(1) 37M-114 thin post
(1) 32-21 post screw
(4) 39-13 post screw
The graphite clamp kit for the half frame would be the 33C-114HF
It's the same graphite clamp, but the studs are different as they are the type that thread up in to the half frame.