Chart
Click to view a .pdf table
showing the changes
in each generation of the
Penn drags for these reels.
IMPORTANT CHANGE FOR Older 20 and 30 Drive Plate/Pinion
See Image to Right
If you have the older parts as shown to the left in the photo and need to replace either the drive plate, drag washer or pinion gear, you will need to get both the newer 117DN drive plate (with drag built in) and the newer pinion gear. The older parts are not compatible with the newer ones. There was also a stage in-between these two where the 6/1-30 washer on metal plate was used with a different version of the 117-30 drive plate that was flatter.

REPLACED BY PART NUMBER 6A-30/p>
This screen is for the 6/1-30 Asbestos washer plate ONLY. New Old Stock - Never Used.