REPLACES ORIGINAL NUMBER 8N-7500 (Brass) ON The older 7500SS/8500SS reels
Gear Notes
REPLACING GEARS NOTE 7500SS/8500SS:
If you are replacing the older BRASS gear with this newer BRASS/ALUMINUM version, you will also need to change your pinion gear to the newer 19P-7500.
THE 19P-7500 GEAR IS DISCONTINUED AND NO LONGER AVAILABLE!
This means you can only replace the aluminum gear with aluminum gear as a repair. Upgrading is no longer possible.
750SSm/850SSm:
For the newer reels, the 8P-7500 pairs with 19-750M pinion. (The 750M pinion CANNOT be used on the older 7500SS/8500SS reels)
NOTE: If the condition of the main gear and the pinion is good , but still seems a little rough, adding 1 to 3 shims should help. Add the shims to the main gear, handle side underneath the bearing. This should eliminate the roughness. The 8A-950M or 154-30 shims (same type of shim) are listed below under similar products.
Related Products
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
12/21/2023 Got it! Its perfect. Thank you so much. It was just on a whim that I even searched for this part. Hard to believe that I could get a reel part for a reel that is 30 plus years old. Thanks again,
1/16/2024 Comprehensive parts list, easy to order, and prompt service. I will definitely use them again.
1/4/2024 Quite a few years doing business with great folks. Simply the best. Thanks for your commitment to the business 👍
