FREE SHIPPING OVER $100* U.S. Only


New Ecommerce store as of 10/30/23

TROUBLESHOOTING HELP REQUESTED! Please [Contact us] if you find a bad link or get an error message, etc, and send us info about what page or item you were on when you saw the issue, with a link if possible, or a screen shot. Not the error screen, we need to know where you were before the error and what you were clicking on. Thanks! ~Mo, Parts & Tech Support

Common Repair Problems - Conventional Reels

45GLS Design Change - Pinion, Bearing

IMPORTANT CHANGE FOR 45GLS Reels

Pinion and Pinion Bearing: Were revised by Penn (date of change unknown).

13-45 and 26-40 Right Side Plate Bearing (Smaller diameter 7mm)

Were REPLACED by:
13N-45 and 26N-40 (Larger diameter 8mm)

Notes on NEW parts
13N-45: The O.D. (8mm) of the sleeve of the pinion that fits inside the bearing is a larger diameter than the original part, as is the I.D. of the 26N-40 bearing. The newer pinion WILL NOT FIT in the older bearing. The older pinion will be loose inside the newer bearing. Measure O.D. of your pinion gear's sleeve to determine what set of pinon/bearing that you have.

Braintree by PayPal
is also our credit card processor
under our MysticParts account
for all purchases as of 1/19/2024
12/21/2023 Got it! Its perfect. Thank you so much. It was just on a whim that I even searched for this part. Hard to believe that I could get a reel part for a reel that is 30 plus years old. Thanks again,
Todd M
Washington
1/16/2024 Comprehensive parts list, easy to order, and prompt service. I will definitely use them again.
Lin R.
Florida
1/4/2024 Quite a few years doing business with great folks. Simply the best. Thanks for your commitment to the business 👍
DB K.
Delaware