This is the original gold drive plate with NO washer. It was intended to work with the 6A-50 (old 6/1-50) drag washer which is no longer available.
IMPORTANT INFO: PENN replaced the drag washer and drive plates for the newer international series reels with a combined drive plate. Penn did not manufacture a combined drive plate specifically for the older 80, 80W, 80S or 80SW reels.
IF YOU NEED THE DRAG WASHER: Our parts dept. at www.mysticparts.com has found that:
The 117DN-50 drive plate works as a substitute for the 117-80 plate with 6A-50 washer used on the 80 and 80W
The 117DN-50 drive plate works as a substitute for the 117-80S plate with 6A-50 washer used on the 80S and 80SW.
The 117AN-80T drive plate works as a substitute for the 117A-80 plate with 6A-50 washer, which is used on the 80, 80W, 80S and 80SW. (The outside diameter is about 1/8" smaller but it will function).